azf-60 series ac/dc power module 60w e-mail:sales@minmax.com.tw tel:886-6-2923150 2013/02/25 rev:11 page 1 of 4 features ? fully encapsulated plastic case ? 3 mounting versions: - pcb mounting with solder pins - chassis mounting with screw terminals - din-rail mounting ? universal input 85-264 vac, 47- 440 hz ? protection class ll ? safety approval to cul/ul/iec/en 60950-1 ? ul508 approval (option) ? over load and over voltage protection ? 3 year product warranty product overview the minmax azf-60 series is a new range of fully encapsu lated ac/dc power supply modules. the product features em i-filter to en55022, class b and ems compliance to en 61000-4 standard.universal input vo ltage 85-264vac and international safety approvals qua lifies these power modules for applications in products with worldwide markets. for indust rial applications, the models for chassis mounting can also be supplied as option with ul508 approval.the azf-60 series provide a cost effective solution for many space critical applications in commercial and in dustrial electronic equipment. model selection guide input current output current 115vac, 60hz efficiency (typ.) output voltage max. @max. load @no load max. capacitive load @max. load model number pcb mounting (for model with chassis mounting, add suffix c) vdc ma ma(typ.) ma(typ.) f % azf-60s051 5.1 10,000 936 50 8000 79 AZF-60S12 12 5000 1060 50 3900 82 azf-60s15 15 4000 1047 50 3300 83 azf-60s24 24 2500 1035 50 1500 84 azf-60s36 36 1666 1035 50 1000 84 azf-60s48 48 1250 1035 50 680 84 input specifications parameter model min. typ. max. unit input voltage range 85 --- 264 vac input frequency range 47 --- 63 hz input voltage range all models 120 --- 370 vdc 115vac --- --- 30 a inrush current (cold start at 25 ) 230vac --- --- 50 a
azf-60 series ac/dc power module 60w e-mail:sales@minmax.com.tw tel:886-6-2923150 2013/02/25 rev:11 page 2 of 4 output specifications parameter conditions min. typ. max. unit output voltage accuracy --- 1.0 2.0 % line regulation vin=min. to max. --- 0.2 1.0 % load regulation iout=min. to max. --- 0.5 1.0 % 5.1vdc output models --- 2.0 3.0 %v pp of vo ripple & noise (20mhz) other output models --- 1.0 1.3 %v pp of vo minimum load --- 10 --- %inom. over voltage protection zener diode clamp --- 120 --- % o f vo transient response deviation (iout=100% to iout=50%) 3 6 % temperature coefficient --- 0.02 --- %/ overshoot --- --- 5 % vout foldback, auto-recovery current limitation (long term overload condition may cause damage) 105 --- --- %inom. short circuit protection hiccup mode, indefinite (automatic recovery) general specifications parameter conditions min. typ. max. unit i/o isolation voltage input to output, 60 seconds 3000 --- --- vacrms i/o isolation resistance 500 vdc 100 --- --- md switching frequency --- 100 --- khz hold-up time --- 20 --- ms mtbf (calculated) mil-hdbk-217f@25 , ground benign 125,000 --- --- hours emc emission conducted and radiated en 55011 class b, en 55022 class b, fcc part 15 class b standard specification requirement performance criteria en61000-4-2 air 8kv cont. 4kv b en61000-4-3 80~1000mhz, 10v/m 80% am, 1khz modulation a en61000-4-4 ac port 2kv dc, sl, tl 2kv not less th an 1 min. b en61000-4-5 1.2/50s(8/20s) ac dif. 1kv dc 0.5kv b 0.15~80mhz, 10vrms (functional earth ports included) en61000-4-6 80% am, 1khz modulation b en61000-4-8 50hz/60hz, 30a/m a 30%, 10ms b emc immunity according en61000-6-1 en61000-4-11 60%, 100ms, 95%, 5000ms c protection class ii according iec/en 60536 cul/ul 60950-1,iec/en 60950-1 safety approvals (ul508 for models with order code suffix ice only) input fuse all models built-in fuse 6a / 250vac external fuse (recommended) 3a slow C blow type environmental specifications parameter conditions temperature range (operational) ambient -10 +70 power derating +50 to +70 2.25w / power derating (5.1vout) +40 to +70 2.25w / storage temperature range -40 +85 over temperature protection at 90 (automatic recovery at 67 ) cooling free-air convection humidity (non condensing) --- 95 % rel. h notes 1 all specifications typical at ta=+25 , resistive load, 115vac, 60hz input voltage and after w arm-up time rated output current unless otherwise not ed. 2 ripple & noise measurement bandwidth is 0~20 mhz 3 these power modules require a minimum output loading to mai ntain specified regulation, operation under no-load cond itions will not damage the power supplies however they may not meet all listed specifications . 4 other input and output voltage may be available, pleas e contact factory. 5 long term short circuit operation may cause damage to the unit. 6 specifications are subject to change without notice
azf-60 series ac/dc power module 60w e-mail:sales@minmax.com.tw tel:886-6-2923150 2013/02/25 rev:11 page 3 of 4 package specifications pcb mounting mechanical dimensions pin connections pin function 1 ac(n) C ac neutral 2 ac(l) C ac line 4 +vout 6 -vout ? all dimensions in mm (inches) ? tolerance: 0.5 (0.02) ? pin diameter 1.0 0.1 (0.040.004) physical characteristics case size : 88.9x67.5x34.2mm (3.50x2.66x1.35 inches) case material : plastic resin + fiberglass (flammability to ul 94v-0 rated) pin material : copper alloy with gold plate over nickel subplate weight : 345g package specifications chassis mounting (order code suffix c) mechanical dimensions connections terminal function 1 ac(n) C ac neutral 2 ac(l) C ac line 3 nc 4 +vout 5 nc 6 -vout 7 nc nc: no connection ? all dimensions in mm (inches) ? tolerance: 0.5 (0.02) physical characteristics case size : 112.0x67.8x38.0mm (4.41x2.67x1.50 inches) case material : plastic resin + fiberglass (flammability to ul 94v-0 rated) weight : 357g 4 6 1 2 bottom view 25.4 [1.00] 88.9 [3.50] 81.3 [3.20] 28.75 [1.13] 27.5 [1.08] 31.45 [1.24] 55.88 [2.20] 67.5 [2.66] 1.0 [ 0.04] 34.2 [1.35] 6.0 [0.24] 0.7 [0.03] mounting m4.0 thread top view 1 2 3 4 5 6 7 4x 3.5 67.8 [2.67] 50.0 [1.97] 100.0 [3.94] 112.0 [4.41] 90.0 [3.54] 11.0 [0.43] 16.8 [0.66] 5.0[0.20] 38.0 [1.50] indication led power " good " indicator dc- on
azf-60 series ac/dc power module 60w minmax technology co., ltd. 18, sin sin road, an-ping industrial district, tainan 7 02, taiwan tel: 886-6-2923150 fax: 886-6-2923149 e-mail: sales@minmax.com.tw 2013/02/25 rev:11 page 4 of 4 package specifications with din rail mounting bracket (order code ac-din-02) mechanical dimensions physical characteristics case size : 112.0x67.8x38.0mm (4.41x2.67x1.50 inches) case material : plastic resin + fiberglass (flammability to ul 94v-0 rated) weight : 410g din-rail mounting kit top view 1 2 3 4 5 6 7 4x 3.5 67.8 [2.67] 50.0 [1.97] 100.0 [3.94] 112.0 [4.41] 90.0 [3.54] 11.0 [0.43] 16.8 [0.66] 5.0[0.20] 38.0 [1.50] indication led power " good " indicator dc- on 3.0 [0.12] 11.0 [0.43]
|
